Skip to content
English - United States
CONTACT US
  • There are no suggestions because the search field is empty.

How to Install Owl Side Steps for the INEOS Grenadier

How to install Owl side steps for the INEOS Grenadier to improve accessibility and functionality for your vehicle. 

 

Introduction

In this tutorial, we will guide you through the installation process of the Owl INEOS Grenadier Side Steps. These side steps not only enhance the accessibility of your vehicle but also add a stylish touch. Follow this step-by-step guide to ensure a smooth installation.

Step 1: Gather Your Tools and Materials

Before starting the installation, ensure you have all the necessary tools and materials on hand.

  • Tools needed:

    • Ratchet and socket set (19mm and 15mm)
    • 17mm wrench
    • Allen wrenches
    • Screwdrivers (flathead and Phillips)
    • Drill (if required for any adjustments)

  • Materials:

    • Owl INEOS Grenadier Side Steps
    • Mounting brackets (included in the package)
    • Bolts and washers (included in the package)

Step 2: Prepare Your Vehicle

To ensure a safe and effective installation, prepare your vehicle.

  • Park your INEOS Grenadier on a flat surface.
  • Engage the parking brake.
  • If needed, lift the vehicle using jack stands for better access to the undercarriage.

Step 3: Install the Side Steps

  1. Locate the mounting points on the vehicle's frame.
  2. Align the front mounting brackets with the existing holes on the vehicle. 
  3. Using the two 15mm flared bolts, hand tighten the bolt into the vehicle.
  4. In the rear, use 2 more 15mm flared bolts and a washer and nut on the backside of the mounting point. 
  5. Use the two 19mm bolts through the center bracket into holes on the vehicle body.
  6. On the center bracket, use the silver 19mm bolt to thread into the body above the bracket.  
  7. Tighten the front and rear bolts with a 15mm socket and a 17mm wrench on the nut. 

Step 4: Repeat on the other side

Step 5: Final Adjustments and Safety Check

After securing the side steps, perform a safety check.

  • Ensure all bolts are tightened.
  • Check the alignment of the side steps; they should be level and securely attached.
  • Test the stability by applying weight to the side steps to ensure they are firmly installed.

Conclusion

You have successfully installed the Owl INEOS Grenadier Side Steps! These steps will enhance both the functionality and appearance of your vehicle. For maintenance, periodically check the bolts for tightness and inspect the steps for wear. Enjoy your improved access and stylish upgrade! If you need additional accessories, consider exploring other products available on the Owl website.