How to Install the Pedal Control 2.0 for the INEOS Grenadier and Quartermaster

1. Turn off the ignition and wait five minutes.
2. Loosen the plug connection from the original plug adapter.
3. Attach both OEM connectors to the accelerator pedal sensor.
4. Lay the cables in such a way that they are securely installed and are not interfering with anything else.
5. Relocate the Pedal Control to a suitable location.
6. Launch the app from your smartphone.
7. Pair your smartphone to the Pedal Control with the default PIN “123456”

Never install or remove it when the ignition system is active. Always switch off the ignition and wait 5 minutes for all electrical systems to power down and fully discharge. Some vehicles may require additional time to power down.

On most vehicles, the connection for the Pedal Control 2.0 is close to the accelerator pedal or the steering column. You must ensure that the Pedal Control and the associated wiring loom do not interfere with the operation of the pedal or the steering and are secured at all times.