Skip to content
English - United States
CONTACT US
  • There are no suggestions because the search field is empty.

Pedal Control for Sprinter Vans Install Instructions

Pedal Control for Sprinter, Revel, or Storyteller van installation instructions. It's a quick and easy way to improve throttle response. 

 

Introduction

This tutorial provides a step-by-step guide for installing the Pedal Control system in your Sprinter van, Revel, or Storyteller. The installation process is designed to be quick and straightforward, enhancing your vehicle's control and responsiveness.

Step 1: Gather Necessary Tools and Materials

Before starting the installation, ensure you have the following tools and materials ready:

  • Pedal Control unit (available at owlvans.com)
  • Zip ties

Practical Tips

  • Review the user manual of your Pedal Control for specific details.
  • Organize your workspace to make the process smoother.
  • Make sure the van has been turned off for 15-20 minutes.

Step 2: Locate the Pedal Area

  • Open the driver's side door and access the footwell.
  • Remove any floor mats or coverings to reveal the area around the accelerator pedal.

    Step 3: Remove the Existing Pedal Connection

    • Disconnect the factory harness with the tab on the connector. 

    Step 4: Install the Pedal Control Unit

    • Align the Pedal Control unit with the van connector. 
    • Pull down on the panel on the center console and tuck Pedal Controller behind console and ziptie into place. 
    • Install app, connect phone, and make adjustments. 

    Troubleshooting

    • If the Pedal Control does not respond, double-check all wiring connections and ensure the unit is securely mounted.

    Conclusion

    You have successfully installed the Pedal Control in your Sprinter van, Revel, or Storyteller. This upgrade will enhance your driving experience with improved pedal responsiveness. For any questions or further assistance, feel free to reach out to the Owl team at 866-505-9277. Happy driving!